PLATFORM - 600 - 900 - 1200 - 1500 mm VAN STAND
1 / 2 / 3 / 4 / 5 / 6 / 7 BIKES
INTERNATIONAL WIPO DESIGN COPYRIGHT IN PROGRESS
MTB / XC - EBIKES - ROAD / CX BIKES - KIDS BIKES - FAT BIKES
ALL ORDERS IN STEALTH BLACK PHENOLIC - IMAGES SHOW BROWN
The SENDER PLATFORM Bike Stand is part of our NEW RANGE of MODULAR Van Stands designed and manufactured in the UK to transport your bike(s). The PLATFORM is a simple Subframe onto which you connect the Stands and Rails.
The PLATFORM can be removed from your van fully attached to the stands and this will add extra stability to your stands when they are used outside of the van. The Platform Traps the Stands which are otherwise free to move along the rails. This feature allows you to adjust the spacing between bikes INSIDE and OUTSIDE the van.
BUILT TO LAST IN 18 mm PHENOLIC PLYWOOD - WE DO NOT COMPROMISE AND USE 12 mm or LIGHTWEIGHT VAN PLY!
The PLATFORM can also be secured to the inside of your van PERMANENTLY or TEMPORARILY and this will allow you to REMOVE your Stands QUICKLY from the Platform so you cant use them outside! The Stands on the Rails (without the Platform) still have good stability.
ADD AN ADDITIONAL STAND TO HOLD YOUR SPARE WHEEL (s)
Either way you have a low profile transportation system with the ADDED benefit of being able to stand your bikes at the event / car park / trailhead to undertake simple bike maintenance or bike washing.
The 600 / 900 / 1200 Rails plus the Stands can be reused if your ever upgrade to the Drawer Units. The PLATFORMS are standalone frames and are NOT compatible with the UNITS.
Due to the width of the 600 PLATFORM it is the least stable. However there are many ways it can be fixed to the inside of your van / vehicle and be more than capable / strong enough to hold and transport your bikes. You can choose a 900 / 1200 PLATFORM and only use 1 or 2 Stands if you think your might need the extra capacity and stability! The Platforms have strap and fixing points (straps and fixings not included) so you can secure the Platform to your van. For maximum security you could screw or bolt the Platform to the van floor.
BOTH THE PLATFORM AND THE STANDS have adjustable load bearing feet that interface with the van / ground for stability.
MODEL SELECTION GUIDE
TRAILHEADS WITH NO PLATFORMS:
You can select the Rails and Trailheads without ANY Platform if you are looking for a method of standing your bikes outside your van or at home in the garage. These can be found as separate products in our shop. These would be excellent for Bike Shop Displays.
PLATFORM 600 WITH RAILS:
This model is designed to Hold 2 Enduro / XC Bikes or 2 / 3 Road Gravel / CX Bikes
PLATFORM 900 WITH RAILS:
This model is designed to Hold 3 Enduro / XC Bikes or 3 / 4 Road / Gravel / CX Bikes
PLATFORM 1200 WITH RAILS:
This model is designed to Hold 4 or 5 Enduro / XC Bikes or 4 / 5 Road / Gravel / CX Bikes
PLATFORM 1500 WITH RAILS:
This model is designed to Hold 5 or 6 Enduro / XC Bikes or 6 / 7 Road / Gravel / CX Bikes
On each model it may be possible to add a kids bike.
THE STANDS ARE DESIGNED TO BE ROLL IN ROLL OUT! You can MICRO ADJUST THE WIDTH to get the perfect TYRE fit! You can also slide the stands on the rails to get the perfect DISTANCE BETWEEN Bikes!
Example: We ROLL IN - ROLL OUT using a PLATFORM 1200 with 4 Enduro bikes in a Long Wheel Base Transit Custom retaining one row of rear seats.
Strapping Bikes down to the Unit is EASY if you need extra security. Eye Bolts can be added at either end of the Platform.
MATERIALS: No Messing! Strong and Durable 18 mm Birch Core Phenolic Plywood
ENVIRONMENTALLY FRIENDLY: Spare / Replacements Parts will be available!
IF you need help please ask. IF you have a custom requirement such as a colour please ask! IF you would like CUSTOM Branding PLEASE ASK!
THE PLATFORM COMES WITH SUBTLE SENDER BRANDING - SUPPLIED IN STEALTH BLACK (Images show Brown)
1) REMOVABLE SYSTEM - THE PLATFORM STAYS IN THE VAN OR COMES OUT WITH THE STANDS
2) ROLL IN - ROLL OUT STANDS with OPTIONAL SECURITY STRAPPING
3) QUICK AND EASY TO REMOVE BIKE STANDS FOR BIKE TASKS / DISPLAY at EVENTS / RACES / TRAILHEAD / CARPARK
5) NO COMPROMISE PREMIUM QUALITY PRODUCT MADE FROM STRONG and DURABLE 18 mm Phenolic Plywood MANUFACTURED IN THE UK
6) HIGH END FINISH AND LOOK
7) MODULAR and ADAPTABLE - ADD MORE PRODUCTS LATER
This product comes FLAT PACKED for SELF ASSEMBLY. You will need to secure some parts with screws. It will take approx 1 - 2 hrs and you will need basic power tools and DIY Skills.
IMAGES ARE FOR ILLUSTRATION ONLY - COLOUR / TEXTURE MAY VARY SLIGHTLY WITHOUT NOTICE
INSTALLATION AND SECURITY:
It is important that you consider the best set up for your bikes and van before purchasing. There are infinite variations of van and internal layouts. We cannot guarantee that our product is suitable for every van. BUT our MODULAR system provides you with plenty of methods and ways you to orientate / locate and secure your bikes to the main units and then to your van. You may wish to add brackets to screw the unit to the floor. Bikes do not need additional strapping once properly rolled into the stand (depending on how you drive ;) However you can easily strap bikes to the stand. For maximum safety and security you should fix / secure the unit at multiple points to your vehicle.